High-speed food-grade tank bottom emulsification head
Contact Info
- No.4285 Shendu Highway, Pujiang Town, 200000
- 胡工
- 18001633556
- 15000845544@163.com
High-speed Food-grade Bottom-mounted Emulsification Head
Product Introduction:
High-speed Food-grade Bottom-mounted Emulsification Head is a high-performance dispersion and emulsification machine designed for bottom-entry into containers. It is used for mixing, emulsifying and dispersing free-flowing or viscous liquid media in batch operations. Applying the rotor-stator principle, the ECA is suitable for applications that cannot be completed by traditional stirring methods.
Product Features:
It is a high-shear dispersion and emulsification machine installed at the bottom of containers, suitable for special environments or hygiene-grade requirements. After processing materials, they can be discharged or circulated separately, which cannot be achieved with traditional bottom-mounted material processing. The ECA can provide two different circulation modes: internal and external.
The ECA machine can avoid strong vortex and aeration, even when the tank has a very low filling level or the container is being stirred or dispersed
during emptying.
The ECA machine has a simple and stable design. It consists of a three-phase motor, a rotor drive shaft, and a flange, equipped with a rotor combined with a compact unit using a cover. The standard version of ECA is suitable for processing
temperatures up to 120 °C. The shaft seal uses a low-maintenance mechanical seal.
Product Parameters:
Model | Size | Processing Capacity | Motor Power @50Hz | Standard Speed @60Hz | Linear Speed @60Hz |
Liter (L) | KW | rpm | m/s | ||
ECA 60 | 60 | 2000 | 2.2 | 3600 | 27 |
ECA 115 | 115 | 5000 | 5.5 | 3600 | 18 |
ECA 150 | 150 | 8000 | 7.5 | 3600 | 25 |
ECA 220 | 220 | 10000 | 11 | 1800 | 18 |
ECA 250 | 250 | 16000 | 15 | 1800 | 21 |
ECA 280 | 280 | 22000 | 22 | 1800 | 24 |
ECA 300 | 300 | 30000 | 30 | 1800 | 25 |
1. The upper limit batch processing volume in the table is measured with water as the medium;
2. The batch processing volume depends on the viscosity and solid content of the material. If you encounter difficulties in model selection, please contact Yuedi Company by phone;
3. For special requirements such as high temperature, flammability, explosiveness, and corrosion, please confirm in writing before customization to avoid danger and loss;
4. It is installed from the bottom of the container, and there is no requirement for horizontal verticality during installation;
5. The data in this table may be inconsistent due to technical improvements or customization, and the actual product shall prevail.
Product Applications:
It is mainly suitable for equipment with small containers, where upper installation is not possible or multiple emulsification pump equipment is required, or for occasions with small initial feeding. It can also meet special working conditions such as vacuum and pressure requirements.
· The bottom-mounted dispersion emulsification pump uses well-selected motors, operates with lower noise and more smoothly, ensuring the high quality of the whole machine
· It causes no pollution to materials, making it an ideal choice for high-cleanliness requirements in pharmaceuticals, food, and cosmetics industries;
· It has a simple and reasonable structure, convenient for cleaning and disassembly, and meets GMP hygiene requirements;
· It is suitable for atmospheric pressure, closed, vacuum, and pressure working conditions;
· The bottom-mounted dispersion emulsification pump can choose mechanical seals: single-end, double-end
· Applicable temperature of the bottom-mounted dispersion emulsification pump: ≤160℃
| Chemicals/Food & Feed Additives/Food Emulsifiers & Stabilizers | |
